To begin with, this update is a little out of date. Moving interstate and dealing with the issues of finding a house, settling kids and so on, meant that I haven't put the time in to keep it up to date. So lets take a step back in time.
The prep work was completed and the car was fully primed. Many hours were spent wet sanding the body and all bolt on bits, to ensure good adhesion of the fresh 2pac paint.
The car was wheeled into the booth, taped up, prep-washed and tack ragged ready to receive it's new paint. I couldn't believe it, after so many years, it was finally getting painted!
The paint purchased was Metalux and the colour chosen was off the original paint code MF. Sunfire Red, over metallic grey, with Clear top coat. Off the gun and still in the booth, the car looked amazing! The car was baked at 60 degrees before it was ready to be taken back to the shop for reassembly.
Fast Forward and it was 3 years since the Telstar had it's refresh of paint and the car was back sitting in my garage. Essentially it hadn't been touched due to work, family commitment and other projects. Thinking back to when it was painted, it looked fantastic in the booth, but there was some issues. Orange peel, dust and some minor adhesion issues, due to the repair and priming of the Uber rare USC fibreglass parts.
The whole car was flat sanded with 1500, 2000, then 2500 grit paper. Now I wish I had of gone down to 3000 grit to really remove some of those scratches, but for now we'll put that down as a lesson learnt..
Stay tuned for polishing updates!
No comments:
Post a Comment